Weicon Adhesives And Sealant

WEICON ADHESIVES AND SEALANTS

ADHESIVES AND SEALANTS  the fast, strong and universally usable power adhesive. Replaces traditional fixings like screws, pegs, rivets, etc. Speed-Flex is pasty and stable and, thus, suitable for problem-free bonding even on vertical surfaces both in-house and outside.

Many materials, like metals, plastics (except PE, PP, PTFE), concrete, marble, natural and artificial stone, ceramic, enamel, gypsum, plates of MDF, wood, flake or gypsum plaster boards can be bonded permanently to themselves and among each other.

Especially on vertical surfaces where additional fixing is not possible or desired, Speed-Flex offers numerous application possibilities, e. g.:

• fastening of cable conduits to walls, ceilings and floors
• bonding of mopboards and corner clips
• bonding of stairs
• fixing of insulating material, e.g. insulating boards
• Speed-Flex is a stable paste and levels out unevennesses (gap-filling). It is free of silicone and solvents, overpaintable ("wet-in-wet"), nonshrinking and neutral in odour when curing.

Best bonding results are only achieved on clean, oil-, grease- and dust-free surfaces.

Instructions for use:

Technical data:

• Processing temperature: +5C to +35C
• Skin-over time*: approx. 10 minutes
• Cure speed*: approx. 3 mm/24h
• Temperature resistance: -40C to +80C (shortly up to +120C)
• Tensile strength (DIN 53504): 2,2 N/mm
• Shore-A-hardness: 58
• Shelf life: 12 months in unopened cartridge.
• * Standard climate +23C and 50% relative humidity of air (DIN 50014-23/50-2)