home

CK3M-CPU1[]1

home
CK3M-CPU1[]1
CK3M-CPU1[]1
Price And Quantity
  • Unit/Units
  • one
  • Unit/Units
  • 90000-2500000 INR
    Product Specifications
    • 90 Millimeter (mm)
    • 230 Grams (g)
    • 80 Millimeter (mm)
    • Multi-Axis Motion Controller
    • 90(H)/80(D)/63.2(W)
    • 63.2 Millimeter (mm)
    • Black
    • 24 Volt (v)
      Product Description

      General Specifications

      This section describes the Motion Controller specifications.

      ItemSpecification
      EnclosureMounted in a panel
      Grounding MethodGround to less than 100 Ω
      Operating
      Environment
      Ambient Operating Temperature0 to 55°C
      Ambient Operating Humidity10% to 95% (with no condensation or icing)
      AtmosphereMust be free of corrosive gases.
      Ambient Storage Temperature-25 to 70°C (with no condensation or icing)
      Vibration ResistanceConforms to IEC 60068-2-6.
      5 to 8.4 Hz with 3.5-mm amplitude,
      8.4 to 150 Hz, acceleration of 9.8 m/s2
      100 min each in X, Y, and Z directions
      (10 sweeps of 10 min each = 100 min total)
      Shock ResistanceConforms to IEC 60068-2-27.
      147 m/s2, 3 times each in X, Y, and Z directions
      Insulation Resistance20 MΩ min. between isolated circuits (at 100 VDC)
      Dielectric Strength510 VAC between isolated circuits for 1 minute with a
      leakage current of 5 mA max.
      Applicable StandardscULus, EU: EN 61326, RCM, KC, EAC

      Performance Specifications

      The performance specifications are shown below.

      ItemCK3M-CPU101CK3M-CPU111CK3M-CPU121
      MemoryMain memory: 1 GB
      Built-In Flash Memory: 1 GB
      Number of connectable CK3W Units
      (when using Expansion Rack)
      8 Units max.
      Or 4 CK3W-AX Units max.
      External connection terminalsNo EtherCATFor EtherCAT communications
      RJ45 × 1 (Shield supported)
      For Ethernet communications
      RJ45 × 1 (Shield supported)
      USB port
      For external memory connection, USB 2.0 host × 1 Type A
      Motion controlCK3W-AX
      Unit
      Maximum
      number of
      controlled axes
      16 axes (when using four CK3W-AX Units)
      Control methodSpeed and torque control using analog output
      Stepper motor control using pulse output
      Commutation control using DirectPWM output
      EtherCATMaximum
      number of
      controlled axes
      None4 axes8 axes
      Control methodIssuing control commands using EtherCAT
      EtherCAT
      communications
      specifications
      Communications protocolNoneEtherCAT protocol
      Baud rate100 Mbps
      Physical layer100BASE-TX (IEEE 802.3)
      TopologyLine, daisy chain, and branching
      Transmission mediaTwisted-pair cable of category 5 or higher
      (doubleshielded cable with aluminum tape
      and braiding)
      Transmission distanceDistance between nodes: 100 m or less
      Maximum number of slaves32
      Range of node addresses
      that can be set
      1 to 32
      Ethernet
      communications
      specifications
      Baud rate100 Mbps
      Physical layer100BASE-TX (IEEE 802.3)
      Frame length1,514 bytes max.
      Media access methodCSMA/CD
      ModulationBaseband
      TopologyStar
      Transmission mediaTwisted-pair cable of category 5, 5e, or higher (shielded cable)
      Maximum transmission
      distance between
      Ethernet switch and node
      100 m
      Maximum number of
      cascade connections
      There are no restrictions if an Ethernet switch is used.
      USB portPhysical layerUSB 2.0 compliant, type A connector.
      Output voltage: 5 V, 0.5 A max.
      Transmission distance3 m max.
      Current consumptionCK3M-CPU101: 5 VDC 7.2 W max.
      CK3M-CPU111/CPU121: 5 VDC 7.8 W max.
      (including End Cover)
      Dimensions (height × depth × width)90(H)/80(D)/63.2(W)
      Weight (including End Cover)220 g max.230 g max.

      Trade Information
      • 100 Per Day
      • 1 Week
      • All India
      Related Products


      Send Inquiry


      Send Inquiry


      Send Inquiry


      Send Inquiry


      Send Inquiry


      Send Inquiry
      right arrow
      left arrow
      Contact Us

      No. 136-137/6, 8th Main, Third Phase, Peenya Industrial Area, Bengaluru, Karnataka, 560058, India
      Phone :+918037302217